Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
(104 reviews)
Price: $44.95
In Stock
Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
Item # LC146059
Retail:$57.95
Our Price: $44.95
You Save: 22%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (104)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC146059
- Camper Jacks
- Trailer Jack
- Hardware
- Repair Kit
- Lippert
- Lead leg repair kit for Venture powered landing gear assemblies
- Kit includes:
- 1 Lead drive shaft
- 2 Drive shaft bushings
- 1 E-Clip
- 1 Drive pin
- 1 Spiral pin
- (1) 12T bevel gear
- (1) 16T bevel gear
- 1 Shim washer
- Made in the USA
146059 Lippert Components Venture Lead Leg Repair Kit
Video of Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Components - Trailer Jack,Camper Jack - LC146059
Today we're going to take a quick look at the Lippert Components Venture Lead Leg repair kit for 5th-wheel RV landing gear.Now if you've had your landing gear for a long time or it's just not really working the way it should and the gears aren't really lining up they used to. It's getting harder and harder to deploy that landing gear out and retract it back in, an easy way to extend the life of that landing gear is to replace the components inside it.It's going to be a pretty easy job. It might be a little bit messy since there is some grease in there to keep everything lubricated and working as it should. But really, all you'll need is some extra grease and, maybe a pair of pliers and a screwdriver.Pop the top off of your landing gear. Remove the components. Be sure to clean those off.
Look for any spots of damage and try to make sure that you remember which part goes where. And then replace all your components in the same order that you took the old ones out.Included in our kit, we're going to get one drive shaft, which is going to be this longer piece here. We'll also get our two bevel gears. We're going to have our, sort of, smaller but fatter one. This is going to be our 12-T bevel gear, and then our 16-T bevel gear.We'll get our two drive shaft bushings, a shim washer, an E-clip, this spiral pin.
You can see it's a little rolled up spiral there. And also our drive pin.So again, all these components are going to fit in a specific order. Your drive pin is going to fit inside our larger washer like that.And then the spiral pin is going to fit inside our smaller bevel.And again, you just want to make sure to note the order the order that you take things out and just replace them the same way.This is going to be a lot easier and quicker, more affordable way to replace your damaged components and get your landing gear back to working as it should, rather than having to replace your entire assembly.Again if you do need any grease to pack in there to make sure everything is lubricated, you can also find that here at etrailer.com, so definitely check that out if you need to pick any up.This product is also made in the USA, and that's going to do it for our look at the Lippert Components Venture Lead Leg repair kit for 5th-wheel RV landing gear.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear - LC146059
Average Customer Rating: 4.8 out of 5 stars (104 Customer Reviews)
by: Brad03/07/2023
Installed on our 2012 Dutchmen Voltage exact replacement. Awesome fit. Used for rear and stabilizer landing legs. Completely disassembled, cleaned thoroughly entire thread. Existing gears showed normal wear but replaced any way. With new bushing provided back to like new.
The front lead and follow legs were replaced but plan to rebuild old with new gears and bushings will keep just in case of one of those days happens. Highly recommend doing this before a failure on the road.
by: Mike 02/03/2024
Kelly was very helpful with getting me the rebuilding kits for my jack she was very professional with helping me everything fit perfect ty
by: Eric02/04/2024
I had to modify the shaft where it shoulders up to the gear box. The gear box has a squared off shoulder, as to the shaft from this kit has a tapered shoulder. I was able to correct this with a bastard file.
by: Dave (11/11/2023
Great customer service. My 1999 trailer is located in Mexico, it was difficult trying to figure out the correct parts and they were able to figure it out with a few photos. The parts were exactly what I needed and have been working as expected since. Thanks etrailer!
by: Randall 11/22/2023
Received all components as listed on order page, all in good condition. Installation was easy, tolerances are nice and tight but still fit well together. So far, so good.
by: Leann02/09/2024
This was exactly what we needed. Shipped fast. The only thing that would have been easier was if you came and installed it. Lol
by: FireMedic-C35107/26/2023
Rebuild kit was an exact fit and works perfectly, unfortunately the drive screw is binding up so I’ll be replacing the whole leg.
by: Joseph08/12/2022
etrailer is a great company the 2 ladies that helped me were fabulous VERY KNOWAGEABLE AND Friendly MELISSA and JOANNE.
by: Wes03/06/2022
Works perfect on my nitrous toy hauler. Installation was quick and simple.
Wes
3/7/2023
Works great, have had no issues. Trailer goes up and down like it should.
by: Mike 06/10/2023
Would recommend this product rather than buying new landing jack. Very easy repair
by: Michael10/18/2023
Worked good when I sold the camper.
by: Mark04/12/2019
Works great. Used to to separate the 2 landing legs on my 5th wheel trailer to allow for independent operation with 2 motors. This modification is done on the passenger side leg (the one without the motor). By adding these parts, you can now install the new motor (LG-142178) and gear box (LC276602) to operate each landing leg separately. -obviously you will need to install a second switch and the appropriate wiring. Great modification -should have been installed like this from the factory.
Mark
4/13/2020
Still working great. No issues
by: Randy 09/15/2023
Excellent parts and shipping couldn't ask for any thing more.
by: Skylar03/16/2023
Have yet to install, hence the less excellent rating. However, the parts do feel quite solid. I ordered both the lead leg kit and follow leg kit just to get them both done and over with (its a 2004 model year)
by: Rex11/17/2017
After shearing off the main pin of the landing gear on my Raptor 5th wheel toyhauler, I ordered the the Lippert landing gear repair kit from etrailer. They were extremely helpful, verified fitment, and shipped it immediately. It not only was easy to replace, but fit /worked perfectly.
Rex
11/17/2018
After a year of use, my landing gear is working great. Im so glad I purchaseinstalled the repair kit myself, as it was easy, and I saved hundreds in shop labor costs.
by: Harry 04/01/2023
Everything was a easy install the only thing that didn’t fit was the bushings. I will order more parts from e trailer if i ever need anything else. The person that took my order was a big help .
by: Mike08/04/2023
Missing pieces. Not impressed at all.
by: Mike 08/07/2022
$50 dollars for a rebuild kit vrs $325 dollars for a complete jack leg, you do the math :) My trailer repair man stated his company couldn't get the rebuild kit and the entire jack leg would cost me $500 dollars retail price !!!! Not only did E-trailer have the jack leg and the rebuild kit, they were way lower priced than dealing with my on sight service tech. So, I bought the rebuild kit and did it myself and it works like it should !!!!!!
by: James 06/25/2023
Perfect fit, easy to rebuild , and cheaper than a new leg.
by: Grant 12/26/2022
Just the replacement kit I needed to replace the sheared shaft when I retracted the leg too far.
My wife warned me.
Delivery was fast.
by: L.Gray05/21/2019
Lippert landing gear rebuild kit is still working flawlessly. God bless.
Lee G.
5/22/2020
Gears are still working great. God bless.
by: Johnny 08/09/2022
Great service. Real helpful on placing order. Stacy was really polite & getting my order to me on time. Had my lead leg repair kit for landing gear repaired & back on road as promised.
by: Ronald 08/09/2020
received Lippert repair kit for our 5th wheel. it was exactly what we needed. quality parts. installed new gears as well even though I only needed drive shaft. Would highly recommend it.
by: Jim B.10/24/2017
My first review that I compelled to write because the service and product were excellent. After viewing a YouTube video to determine why my Fifth Wheel landing gear would not extend or retract, I knew this repair kit was exactly what I needed. Ordered kit at 4 pm Thursday and received package in the mail Saturday. All parts were an exact match. Lesson learned - lube the bevel gears in top of the landing gear legs. Cap on top is easy to remove. Hats off to Chelsey who helped me place the order and provided exceptional follow-up.
by: Steve03/08/2019
I bought an older 5th wheel camper that needed some work. I was happy to find etrailer that had replacement parts. Delivery was fast and the parts are exact replacements for what I need. I appreciate the follow-up email as well. My leveling jacks are back doing their job. I'm probably going to order the tailgate I found for my truck next!
25
104
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Repair Kit For Venture 5TH Wheel Landing Gear On a 2011 Keystone OutbackIt appears your 2011 Keystone Outback Sydney Edition 330FRL will have Venture landing gear. If this is true the Repair Kit # LC146059 is for the lead leg on the drivers side and the Kit # LC146060 is for the follow leg on the passenger side. I wasn't sure when you said left leg if that was in reference to the trailer or looking at the jacks from the front of the trailer.
view full answer... - Repair Kits for Lead and Follow Jack Landing GearThank you for the photo but trailer manufacturers do not keep any type of database with specific part numbers that we can access; even if they did it would not be a guarantee that the parts would be the same on a trailer that was made 20 years ago. The only repair kits we have are designed to be used with specific Lippert or Stromberg Carlson landing gear so you can take a chance and see if one of them will work. For a lead leg repair kit there is the Lippert # LC146059 or Stromberg Carlson...
view full answer...
- Parts Needed to Rebuild Lippert Landing Gear Legs for Keystone MontanaYes. You can rebuild the # LC178652 (follow leg) and # LC178653 (lead leg) with part # LC146059 for the lead leg and part # LC146060 for the follow leg.
view full answer... - Replacement Venture Landing Gear Leg Rebuild Kit The correct leg rebuild kit for your Venture Landing Gear Jacks is part # LC146059 for the lead leg and part # LC146060 for the follow leg.
view full answer... - Troubleshooting Landing Gear Legs on Keystone Cougar Not Going Up or Down Since you're able to operate the landing gear legs manually, most likely the internal gears are okay. Where I would check first though is the actual 12V battery that you mentioned being hooked up to. It's vital that the battery these systems are wired to are COMPLETELY charged and in good condition. I know you said you're getting power to the motor, but I'm wondering if there's enough. If you test the wiring right after the battery, you should be getting 13+ volts. If you show anything...
view full answer... - Availability Of Replacement Parts For Lippert Landing Gear 8000lbsIt sounds like you need a leg repair kit, or possibly two if both sides are damaged or worn. For the lead leg, which is the leg with the motor/crank attached to it, you will want to go with Lippert Venture Lead Leg Repair Kit # LC146059. For the follow leg, the leg without the crank/motor, go with Lippert Venture Follow Leg Repair Kit # LC146060. These kits are a fit for the Lippert Venture landing gear setup which seems to be what you have on your Arctic Fox 27-5L 5th wheel RV. While...
view full answer... - What Can Damage The Internal Gears Of My 5th Wheel Jack?Though I could not find anything about the T46059 repair kit you referenced, but odds are the jack isn't rated high enough for the weight of your trailer. Or there is more than just the gears that need to be replaced. What you will probably want to do is replace either the leg, or what may be a better idea, the whole system. For the leg, it will depend on if it is the lead or follow leg, but as the Lippert Venture Lead Leg Repair Kit # LC146059 is for the lead leg, you will need the Replacement...
view full answer...
- Venture Landing Gear Replacement Gear Kit for Lead and Follow LegsYes, thankfully the Venture landing gear sets were all made to the same design so the repair kits like the lead leg repair kit part # LC146059 that you referenced is a confirmed fit for all of them. The follow leg repair kit is the part # LC146060.
view full answer... - Replacement Parts for Atwood Landing Gear Legs In the past we have had customers use the Replacement Gearbox part # LC276602, Lead Leg Leg Repair Kit part # LC146059, and Follow Leg Repair Kit part # LC146060 on the Atwood landing gear legs with success but it would be hard for me to confirm fit without pictures and part numbers. Atwood was sold off to Lippert some time ago so direct fit parts are not always available. With that being said, I think the best option for you is a complete replacement. If you can measure the distance...
view full answer... - Replacement Parts or Assembly for Landing Gear of 1998 Gulfstream InnsbrookThe landing gear looks like a standard set based on the pictures and the dimensions you listed. The part # LC146060 would be what you need for the follow leg and then part # LC146059 for the lead leg.
view full answer...
- How to Know Which Lead Jack Repair Kit Will WorkIn order to know which lead jack repair kit is the right one you do need to know who the manufacturer of the landing gear is on your Jayco Eagle. If you have Lippert Components, Venture or Stromberg Carlson landing gear you can use Lead Jack Repair Kit # LG-146059. If your have Lippert Power Landing Gear you can use Repair Kit # LC146059. Otherwise you may need to replace your landing gear with something like the Stromberg Carlson Electric Landing Gear Set # LG-1 if you have brackets welded...
view full answer...
- Replacement Gears for Landing Gear on a 2004 Keystone Montana 5th Wheel TrailerThere are landing gear repair kits for the lead and follower legs on your Keystone Montana 5th wheel trailer. For the lead leg use # LC146059 and for the follower leg use # LC146060. The kits include the gears as well as other parts you may need to repair the legs. Current pricing is on each of the product pages.
view full answer... - Solution for Atwood Landing Gear In Need of Repair KitI really wish we had a repair kit for your Atwood landing gear but we no longer have options for them since they are no longer around. Realistically your only option will be a new landing gear set like the # LG-1 which will easily replace what you have now.
view full answer... - Replacement Landing Gear Box for Venture TrailerIt sounds like you need the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602. If the pin you are referring to is in the leg itself, than I recommend the Lippert Components Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059 or follow leg repair kit # LC146060. I've attached a link to a similar video to assist.
view full answer... - Replacement Landing Gear Legs or Repair Parts for Landing Gear VM900L-068652We have repair kits for the VM900L series. The repair kit for the follower leg is # LG-146060 and the repair kit for the lead leg is # LC146059. Replacing the parts is going to be a whole lot less expensive that replacing the legs. If you want to replace the legs anyway then we have # LG-179014 as the follower and # LG-179013 as the lead leg.
view full answer... - Repair Kit for Lippert LCI PN241846 Lead Leg on Landing Gear System The Lippert Landing Gear Leg model LCI PN241846 on your landing gear system refers to the Lippert Heavy Duty Landing Gear Master Leg # LC241846. For a repair kit that will work nicely with this leg, you can use the Lippert Lead Leg Repair Kit # LC146059. This kit includes 1 lead drive shaft, 2 drive shaft bushings, 1 E-Clip, 1 drive pin, 1 spiral pin, 1 12T bevel gear, 1 16T bevel gear, and 1 shim washer.
view full answer... - Diagram to Use when Installing Lead Jack Repair Kit # LG-146059Yes, I attached a diagram you can use to install the # LC146059 that you referenced.
view full answer...
- Repair Kit for Lead Leg on Venture Landing GearRepair kit # LG-146060 fits the follower leg on a Venture landing gear set like yours. For the lead leg you will need # LC146059.
view full answer... - Parts Needed To Repair Broken Landing Gear Legs On Keystone Raptor TrailerWe do offer repair kits for most landing gear legs, the Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear part # LC146059 or Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear part # LC146060. That said, they only included select components and if the part you're looking for is not included you'd be best off replacing the entire legs. The Stromberg Carlson Manual Landing Gear Set part # LG-183708 will replace legs that have a 29-1/2" long outer tube and...
view full answer... - Venture Landing Gear Repair Kit or Replacement Lead LegIt sounds like your Venture landing gear is not working properly on the lead leg. I recommend the Lippert Components Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059 if you want to fix the internal gears. If you are looking for the replacement lead leg, you will want the Replacement Lead Leg for Venture 5th Wheel RV Landing Gear # LC119102.
view full answer... - Landing Gear Repair Kit for Venure VMC900L Follow LegSince your Venture leg is the follow leg the repair kit is # LC146060. If you had the lead leg it would be # LC146059.
view full answer... - Determining Which Rebuild Kit Is Correct For Landing Gear On 2010 Forest River Wildcat 5th WheelIt may very well be possible to rebuild the landing gear on your 2010 Forest River Wildcat 5th wheel with a rebuild kit, but first you will need to identify which model landing gear is installed. On either of the landing gear legs there should be a part number, this may be on a white sticker or stamped into the metal depending on the specific landing gear. With this part number I can then identify your landing gear and recommend the correct rebuild kit. If there is not any part numbers...
view full answer... - Replacement Gear Set for Venture 5th Wheel Landing GearAccording to Lippert Components, their # LC146059 gear set replaces the gears in the lead leg, while # LC146060 will replace the gears in the follower leg. The gear sets are compatible with Venture landing gear.
view full answer... - Landing Repair Kit for Lead Leg of Venture VMC900R-146877Yes, for your Venture VMC900R lead leg jack the part # LC146059 is the correct repair kit.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Kathleen M
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brad
3/8/2024
The rebuilds are working as well as the ones I replaced at same time with new. Planned preventive maintenance beats a failure on the road. Keep them greased and replace if show significant wear.